Made of brass and stainless steel. Water-cooled cooling structure is stable. Equipped with wooden base for operating and placing conveniently. You will love this exquisite mini engine.
The carburetor with adjustable speed is used. The ignition is powered by 1.5V power supply.
Its starting can be divided into two ways: external force (electric dril) and manual starting. The mini model engine runs easily.It can be used as an intuitive view of how the engine works, as a desktop model to play with, and a great personal gift for model enthusiasts Engine Startup Steps. Check the wiring of the engine from the wooden base, then connect the fuel tank pipeline, and install AA battery (1.5v). Fill the tank with 95 # gasoline.
After the filling is completed, turn the flywheel clockwise on the right side of the engine (power switch surface) for many turns. No air can be generated. Turn on the power switch and quickly rotate the flywheel clockwise on the right side of the engine (power switch surface) to start the engine. If the ignition device is normal and the cylinder compression is normal, if the machine cannot start normally, it is very likely that the carburetor oil needle needs to be adjusted. After tightening the main oil needle on the carburetor, loosen 1/4 turn and start the flywheel, so that the mixing ratio of gasoline and air can reach the normal working ratio.
When the machine stops, the power switch should be turned off. Material: Brass + Stainless Steel + Wood. Wooden Base: 150 x 120 x 30mm. Engine: 104 x 94 x 78mm. Product Size: 15 x 12 x 10.8cm.
Package Dimensions: 20 x 20 x 15cm. 1Set x Engine Model Packing list. The product came very well packaged.
The item "2.6cc Mini Stirling Engine Motor Gasoline Model Water-Cooled Cooling Structure" is in sale since Tuesday, January 12, 2021. This item is in the category "Toys & Hobbies\Models & Kits\Tools, Supplies & Engines". The seller is "arkbalma_0" and is located in Shanghai. This item can be shipped worldwide.