EK-Torque Angled 90° - Black. Revolvable angled (90°) adapter fitting with G1/4 threads. In the form of a cylinder, it is very sturdy and there are zero movements in the revolvable joint. This Quantum Line adapter is made out of CNC machined brass with high-quality Satin Black finish while the seal is made by quality rubber O-rings. These angled adapters make difficult tube routes a breeze.EK-CryoFuel Clear is a pure, non-toxic coolant based on the patent-pending chemical formula, which prevents the creation of any sediments in the liquid cooling loop. The 100mL concentrate is to be mixed with distilled water in ratio 1:9 to form 1L of ready-to-use coolant. To make mixing the concentrate with distilled easier, EK recommends the use of filling bottle, which is included in the package. This small creativity pack will allow users to transform their clear or white EK-CryoFuel coolants into beautiful, personalized, one-off colors. The package consists of Red, Yellow, and Blue dye bottles that you apply to your base coolant - EK-Cryofuel Clear. 2 meters of EK-DuraClear 9,5mm (3/8") / 15,9mm (5/8") premium-quality transparent PVC tubing with long-lasting clarity. EK-Loop Multi Allen Key (6mm, 8mm, 9mm). Multi-purpose tool that replaces the standard 6mm, 8mm, and 9mm Allen key, while it can also be used to operate acetal plugs (with the line style groove). The key does not only replace all of the crucial Allen key formats used for building a liquid-cooled PC but also helps protect your liquid cooling gear. A simple tool used to make a straight tube cut. Safe and easy to use.
Very convenient for mixing the EK-CryoFuel concentrates with distilled water. The telescopic tube of the filling bottle can reach even the most remote and crammed fill ports. The integrated addressable D-RGB is compatible with popular RGB sync technologies from all major motherboard manufacturers.The arrow marking on the 3-pin LED connector is to be aligned with the +5V marking on the D-RGB(A-RGB) header. The kit is easy to install, use, and maintain, a thorough installation manual is included. The majority of components have been pre-assembled resulting in a quick and painless installation procedure. Once installed, this kit is a full custom loop solution. It can be upgraded with additional water blocks and components, such as additional radiators. EK-Quantum Power Kit D-RGB P360 complete list of items. Pump - Tubing: EK-DuraClear 9,5/15,9mm (3/8'' - 5/8'') (2 meters) - Compression fittings: EK-Torque STC-10/16 - Black (6 pcs) - Angled adapters: EK-Torque Angled 90° - Black (2 pcs) - Coolant concentrate: EK-CryoFuel Clear Concentrate (100mL; for 1L of coolant) - Y-cable splitter: EK-Cable Y-Splitter 3-Fan PWM (10cm) - AMD mounting bracket and AMD AM4 backplate - D-RGB accessories: EK-D-RGB 6-Way Splitter Cable - EK-Loop Uni Pump Reservoir Bracket - 120mm - EK-RES X3 - Holder 60mm - ATX bridging plug. EK-Loop Soft Tube Cutter - Foldable Filling Bottle - EK-CryoFuel Dye Pack.
This water cooling kit is compatible with the following CPU sockets. Intel LGA-1200 - Intel LGA-1150/1151/1155/1156 - Intel LGA-2011(-3) - Intel LGA-2066 - AMD Socket AM4. Made in Slovenia - Europe! List of components may be subject to change in the future according to EKWB's best practices. Distilled water needed to dilute the cooling liquid concentrate is not included!
EK recommends at least one 120mm fan and radiator space for cooling one component. For example, if you want to cool CPU and GPU in the same loop, we recommend a minimum of 240mm radiator and two 120mm fans. EKWB recommends the use of fan regulation adapters in case your motherboard does not support fan speed regulation. Such devices are not included in the kit.The item "EK-Quantum Power Kit D-RGB P360" is in sale since Saturday, January 2, 2021. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Fans, Heat Sinks & Cooling\Water Cooling". The seller is "ch_alex2005" and is located in Moscow. This item can be shipped worldwide.