PC water cooling kit (various Parts)

PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)
PC water cooling kit (various Parts)

PC water cooling kit (various Parts)

Old water cooling kit, removed from old PC. All parts are used, working but requiring a clean or possibly minor pieces/screws etc. Magic Cool here are offering a 120mm single radiator from the G2 series. The heat exchangers of the G2 series are characterised by their flat design with only 27 mm height and their "dual pass" design with two parallel waterways.

In addition, the G2 radiators have a fin density of only 16 FPI, which also slow-speed Silent fan generate sufficient pressure to penetrate the copper fins. Fans can either be mounted on one or both sides of the single radiator. Thanks to the small height of only 2.7 cm (without fan) and the width of 12 cm the G2 models are highly compatible with many cases and have two standard G1 / 4-inch connectors for integration into a cooling loop. With its design and excellent cooling performance, the Magicool radiators become top choice of water cooling users. The fins are specially designed for silent fans, while the parallel coolant channels reduce liquid resistance to a minimum.

On both sides of the radiator M3 threads are integrated to allow flexible fan mounting, on top chamber both G1/4 threads allow easy installation of all common fittings and barbs. Dual pass radiator designed for computer liquid cooling. High liquid and air flow design.

Perfect for all overclocking and silent projects. The Ion's versatile bracket can easily be mounted to any 120/140mm fan, fan mount, or radiator and can rotate to four different positions. This allows the reservoir to be mounted in the majority of PC cases, without the need for any modifications. On each side of the Ion is a G1/4 inlet port and outlet port, making it easier to neatly route the tubing in your build. On the top of the Ion is a large M20 fill cap, for easy filling and topping up of the reservoir.

The Ion's internal reservoir is encased in a high quality, extruded and CNC cut aluminum shell. The internal acrylic reservoir is LED backlit to lights up the coolant and viewing window. This makes it simple to perfectly match the lighting color of your PC build. Each Ion reservoir is carefully hand assembled and pressure tested before sale, to ensure reliability and quality. Dimensions: 58 x 50 x 154mm (excluding accessories).

Fill Cap: 1 x M20. This product perfectly combines all the requirements from different watercooling users. Quiet: At less than 22dB even most fans in the system emit more noise. For decoupling and therefore further noise reduction two kits are included with the pump: The first a map for quick and easy mounting on the case floor. The mat is self-adhesive on both sides and therefore reliably fixates the pump.

The second possibility for pump installation are two brackets with which the pump can be fixated in the case. A ceramic-based centrifugal bearing promises quiet operation and a long lifespan.

Compact: With the small outer dimensions (see technical specifications) the pump can be installed in almost any corner of the case, even in Midi- or Mini-towers. The compact dimensions of the pump also make connection to the cooling loop easy as the pump's position can easily be varied. Powerful: Such a small and quiet pump so far always required compromises regarding the power. 2,6m of pressure head and 600l/h of flow are the kind of performance that will not be stopped even by cooling loops even with multiple waterblocks. G1/4 connection: No adaptors, no annoyingly long connectors any more!

Simply screw in the desired connector and you are set to go! 12V connector: The first advantage of a 12V connector is that it makes the connection with a 230V cable obsolete and that internal operation is made safe and easy. The other great feature of this pump is the connector: It is not a standard 4-Pin Molex connector, it is a 3-Pin fan connector which powers this pump (Important: Check the requirements and capabilities of the sockets to which you connect the pump).

This pump can therefore be operated at a fan connector on a Mainboard or a fan controller. This also allows a speed reduction of the pump: Only 8V are required for starting and operation of the pump which makes it additionally quiet and smooth in operation. The fan connector also offers the advantage of rpm monitoring with a compatible controller. Outer dimensions: (L x W x H): 61,7 x 59,7 x 46,7mm. Nominal operating voltage: DC 12V.

Noise emission: below 22 db. Aquacomputer, CUPLEX KRYOS DELRIN FOR SOCKET AM3/AM2. The development of the kryos was the most extensive development of a CPU waterblock in Aqua Computer history. From the outside the unusual attention to every detail is not always visible, but each and every detail was simulated in many variants, manufactured and tested.

During testing roughly 70 cooling plates and approximately 20 jet plates were manufactures, all versions developed in CAD added up it were more than 1000! In addition to this an extensive testing rig was used and many tests were conducted. During all these numbers and data collected to gain the last 1/10th of a degree we had only one goal: To make the world's best waterblock!

During our testing it was put up against all competitors known to us and we only had that one goal: Being better than the rest of the world. We have achieved this during our testing, and currently 15 cuplex cryos are going around the world to prove their status independently.

The basic principle of the waterblock is rather simple and is very similar to the cuplex pro. The water is injected centrally and afterwards passes through he micro-structure in the copper cooling plate which, unlike many competitors, consists of single pins and not slots.

This structure is truly fascinating: It features 1911 single copper pins. The pin size of 9.25x0.45mm and almost every single pin has a unique geometry. The box also includes a stock AMD AM2/3 heatsink with fittings. Manual valves, useful for easy filling. Any questions please drop me a line. The item "PC water cooling kit (various Parts)" is in sale since Monday, October 14, 2019. This item is in the category "Computers/Tablets & Networking\Computer Components & Parts\Fans, Heatsinks & Cooling\Water Cooling".

The seller is "meatyplasmabaws" and is located in Cockburnspath. This item can be shipped to United Kingdom, Antigua and barbuda, Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Australia, United States, Bahrain, Canada, Japan, New Zealand, China, Israel, Hong Kong, Norway, Malaysia, Mexico, Singapore, South Korea, Switzerland, Taiwan, Thailand, Bangladesh, Belize, Bermuda, Bolivia, Barbados, Brunei darussalam, Cayman islands, Dominica, Egypt, Guernsey, Gibraltar, Guadeloupe, Grenada, French guiana, Iceland, Jersey, Jordan, Cambodia, Saint kitts and nevis, Saint lucia, Liechtenstein, Sri lanka, Macao, Monaco, Maldives, Montserrat, Martinique, Nicaragua, Oman, Pakistan, Paraguay, Reunion, Turks and caicos islands, Aruba, Saudi arabia, South africa, United arab emirates, Chile, Bahamas, Colombia, Costa rica, Dominican republic, Kuwait, Panama, Qatar, Uruguay.


PC water cooling kit (various Parts)