3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD

3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD
3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD

3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD

3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD. 1 x 3KW ATC Spindel Automatic Tool Changer Water Cooled Spindle Motor 380V 24000rpm 100mm Model. 1 x 3.7KW SUNFAR brand Inverter VFD 380V. 1 x BT30 tool holder BT30-ER25.

100% Brand New and High Quality!! Automatic tool changer electric spindle technical parameters. The bearing of spindle use grease lubricated angular to contact bearings, can be achieved lifelong lubricating within the life cycle.

The spindle use forced coolling mode to coolling motor, front and rear bearings. Coolant flow through the reasonable arrangement cycle watercourse of the spindle body, thus can take the heat generated of the spindle rotation speed, to achieve thermal equilibrium, let spindle temperature within a certain constant value. External cooling device effect:maintaining a constant temperature of the coolant. The spindle built-in PTC 140 temperature sensor(Technical parameters are visible in other sections of this specification), you can read it anytime if you need to protect the motor temperature.

The tool clamping methods:this spindle built-in automatic tool change device, shank form is BT30. Spindle blowing dust/seal gas pressure (MPa). Spindle gas seal gas flow. Spindle static state pulse (µm). Motor windings Pressure test (V/M). 1500V/1 minute withstanding Voltage test. For castings, aluminum, glass, etc.

Circulating Cooling System Description The system must ensure that the cooling water temperature of supply spindle is between 24-28 degree. Usually setting the flow switch in return pipe of the cooling system, to ensure the supply of spindle cooling water.

Air sealing control In order to prevent water or impurities enters internal of the spindle, spindle will have gas sealing device, the gas seal machine must be started start with the machine at the same time. And the need to go through multi-stage filtration.

The quality requirement of gas which is used in gas seals: Oil content. 380V input with 380V output. VS500-4T0037G 380V 3 phase input and 380V 3 phase output. Key word: VS500 series inverter. Relying on its superior costefficiency, VS500 series general inverter is widely.

Applied in the industry of machine tool, electricity, textile, transportation, transmission. The series product has been developed to be model in high stability, reliability after on-site inspection of.

More than 700,000 inverters. Compact yet reasonable structure reduces the volume of inverter 20%-30% times than the traditional general inverter; independent cooling duct and closed main loop design. Droop control function: automatically balance power of drive system of inverters on the same transmission chain. Adopts DC fan characterized by the large volume, high wind pressure, excellent cooling. Particular self-adaptive control technology, allowing for automatic current and voltage limitation and under-voltage suppression during operation.

Standard configuration of RS485 communication interface, optional MODBUS protocol and SUNFAR self-defined protocol; with linkage synchronous control function, allowing for easily communicating inverters with PLC. Industrial personal computers and other industrial personal equipments. BT30-ER25 tool holder with 45° pull stud. Please check out your address carefully when processing order. We are not responsible for wrong or undeliverable address. Please give us the opportunityto resolve any problem when you have, we concern your problem and we will try our best to resolve it. We work hard to make sure EVERY CUSTOMER 100% satisfaction. When you have the parcel, and not satisfied the goods or it is other problem like as broken, pls tell us the detail reason and provide the photos to us.

Item must be in it's original condition and no physical damage. We are online from Monday to Saturday. The item "3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD" is in sale since Monday, September 6, 2021. This item is in the category "Business & Industrie\Automation, Antriebe & Motoren\Elektromotoren\Servomotoren". The seller is "powace1515" and is located in Lausanne.

This item can be shipped to European Union member countries, United Kingdom.


3KW BT30 ATC Spindel Werkzeugwechsel Water Spindle Fräsmotor CNC Kit + 3.7KW VFD