DE 2.2KW ER20 CNC Wassergekühlter Water Spindel Motor&VFD&Clamp&Pump&Collet Kit
DE 2.2KW ER20 CNC Wassergekühlter Water Spindel Motor&VFD&Clamp&Pump&Collet Kit. For CNC Router Milling Engraving Machine. We will send the item from Germany by DHL to EU Countries. 1 x 2.2KW ER20. 4 bearings (C7005x2 + C7003x2). 3HP (220V input and 220V output). 1 x 80mm spindle bracket clamp. (1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm each 1pcs). 100% Brand New and High Quality!! 2.2KW WATER-COOLED SPINDLE MOTOR ENGRAVING MILLING GRIND. 4 bearings(C7005x2 + C7003x2), P4 class. Professional aviation Interface, Interface 1234 marked 123 respectively connected to the inverter output end of the (U, V, W), 4 is blank to avoid connection wrong to burnt the spindle. Wood, Aluminum, Stone, metal, glass, PVC industry. 2.2kw Inverter VFD 220V input with 220V output. E100 series inverter uses a simplified vector control technology, with extensive application of functional blocks. Can be the whole frequency band of torque automatic compensation, to compensate for the output torque to meet the user requirements for high torque; to improve the dynamic response and motor control features. Have a proportional, integral and differential (PID) control function of the closed-loop control, can be used for process control , such as constant pressure water supply. Built-in the function of the textile-specific swing band. Fast current limit (FCL) function, to avoid undue running trip. Acceleration / deceleration ramp features have a programmable smoothing function.
Prevent the speed lose during over-voltage, in running the inverter automatically limit the increase of DC bus voltage. Fault and fault query monitoring features. Built-in serial communication interface, using standard modbus communication protocol. There are vents or ventilation devices in indoor places.
Ambient temperature -10 C 40 C. If the ambient temperature is bigger than 40 C, but lower than 50 C, may take off the cover board of inverter or open the front door cabinet, in order to reduce temperature. Try to avoid high temperature and wet places, humidity less than 90%, and without dewfall.
Away from air pollution such as flammable and corrosive gases, liquids. No dust, floating particles of fiber and metal. It is not allowed that the inverter falls down or suffers from fierce impact or the inverter installed at the place that vibration frequently.
Keep away from the electromagnetic radiation source. 75W CNC spindle motor water pump 3.2m 220VAC. Fit for 0.8kw, 1.5kw, 2.2kw, 3kw, water cooled spindle even 4kw and 5.5kw too.
(1mm, 2mm, 3mm, 3.175mm, 4mm, 5mm, 6mm, 7mm, 8mm, 9mm, 10mm, 11mm, 12mm, 13mm each for one piece). Out dia (D1):11.5mm. Run-out tolerance 0.1mm (0.006) First class 1065 carbon steel Hardened & precision groun. The item "DE 2.2KW ER20 CNC Wassergekühlter Water Spindel Motor&VFD&Clamp&Pump&Collet Kit" is in sale since Tuesday, August 18, 2020. This item is in the category "Business & Industrie\Metallbearbeitung & Schlosserei\Maschinen\Fräsmaschinen". The seller is "powace08" and is located in Prague. This item can be shipped to European Union member countries.
- Bearing: 4pcs bearings
- Clamp: 80mm Aluminium Bracket Clamp
- Pump: 75W Water Pump 220V 3.2m
- Lubrication: Grease
- Spindle feature: long length and high torque,waterproof
- Marke: RATTM MOTOR
- Angebotspaket: Ja
- Modifizierter Artikel: Nein
- Modell/Typ: 2.2KW water-cooled spindle&VFD&clamp&pump&collet
- Leistungsbedarf (kW): 2.2KW
- Herstellernummer: Does not apply
- Steuerungsart: CNC
- Herstellungsland und -region: China
- Inverter: 2.2KW VFD 220V
- Fixing spindle: 80x246mm
- Ausländisches Produkt: Nein
- Voltage: 220V
- Cooling: Water cooled
- Collet: 14pcs ER20 collet (1-13mm)
- Speed: 10-24000rpm
- Frequency: 0-400Hz