Default 0.4mm, you can remark it in your order if you need other size(0.1mm-0.8mm nozzles orifice option). Brass body with stainless steel orifice inside.
Food grade material, 1/4 size. Cooling, Humidification, dedusting and Garden Micro irrigation. Multi-purpose-----------------Home use for garden sprinklers, shower, water taps in the boat, caravan or motor home.
Agricultural purposes-------spray for farm chemical pesticid. Rubber bracket can absorb vibration from the pump when working. Caution:pump should be used in dry condition, cannot submerge into water. 120mm length Cable ties and 7mm Clamps. Water inlet port can absorb water by itself then spray mist from nozzles on water outlet.Which can be widely used in factory humidification, cooling, salt spray testing, artificial fog and other humidification sites. Keep the 3M water inlet totally immersed into the tank.
Connect hose and pump with 1/2'' white connectors, note the arrow direction of inlet and outlet on the pump. Connect the power supply to wash the system for 1 minute to purge the system and remove any impurities. Screw the misting nozzles to the Tee fittings, except the last one on the end plug. Turn on the power to wash the system for 2 minutes to insure that the system is fully purged.Turn off the power and install the last nozzle into the fitting with the end plug. Fix the misting line by the cable ties saddle clamps provided. Turn on power then jets will work, enjoy the cooling misting system.
Turn off the nozzles, keep them dry and clean when you don't use the misting system for a long time. Landscaping, cooling, air humidification, spray disinfection, epidemic prevention, deodorizing air purification, etc.
Note: Soaking the misting nozzle in cleaner periodically to remove mineral deposits, thus can prolong its lifetime. This item is in the category "Home & Garden\Yard, Garden & Outdoor Living\Watering Equipment\Spray Guns, Hose Nozzles & Wands". The seller is "yossi-store" and is located in this country: CN. This item can be shipped worldwide.