Feuling 7268 Race Series Cam Chest Kit with 592 Cam Water Cooled 17-19 Harley M8

Feuling 7268 Race Series Cam Chest Kit with 592 Cam Water Cooled 17-19 Harley M8

Feuling 7268 Race Series Cam Chest Kit with 592 Cam Water Cooled 17-19 Harley M8

M-Eight WATER COOLED camchest kits include all necessary components from top to bottom of the camchest conveniently packaged under 1 part #. These combination kits not only ensure each individual part is designed to work and function together but to do so in total harmony. These camchest kits take the guess work out of the ordering process and guarantees the engine builder maximum reliability, peak performance and the coolest engine and oil temperatures obtainable. Quieter and smoother engine operation.

Increase oil pressure, scavenge volume and engine oil flow. 30% more pressure gear volume over stock. 53% more scavenge gear volume over stock.

42% more scavenge volume with port sizing, matched passages and holes to the engine case. 68% more oil volume to the crankshaft and connecting rod bearing. 15-25 degree cooler engine temperatures. 15-30 degree cooler oil temperatures. 10-30 more PSI of oil pressure.

Reduces wet sumping, blow by and oily air cleaners. Magnets in oil pump to help protect gears and pressure relief valve. Test results show 2 HP gain and 2 ft/lbs of TQ gain to the rear wheel on Milwaukee Eight. NOTE: FEULING test results show a 50% reduction of engine sump oil level. 592 CAM - The big nasty Put your big boy pants on get serious with bore size, ported cylinder heads and throttle body.

Aggressive camshaft requiring high lift and higher load valvesprings, performance pushrods and lifters. High flow air cleaner and triple stepped exhaust pipe highly recommended. FEULING also recommends matching this cam with our RACE SERIES oiling system #7097 or #7099. High lift High Load valve springs are required, see FEULING BEEHIVE valve spring kit #1207.

Heavy duty pushrods are highly recommended see #4087. 592 Cam Part # 1348 (DS09251265) RPM range 2,850 - 6,250. 578 20 34 234 97 Exhaust. 592 68 16 264 116 Overlap: 36 Kits include: FEULING. High volume Oil pump, HIGH FLOW billet Camplate, REAPER.

Series Camshaft, hydraulic roller lifters, fixed length pushrods, TIMKEN. Cam bearing, rocker arm studs and nuts, gaskets, O-rings, ARP. Cam/crank fasteners, washers, moly lube and LOCTITE. Kits include a RACE SERIES. Oiling system: billet 7075 oil pump, RACE SERIES.

Lifters, HIGH FLOW billet 7075 aluminum camplate. Billet 7075 aluminum oil pump which is 50% harder and stronger than the factory pump holding tighter tolerances under temperature, deeper scavenge kidneys over HP+ oil pump. Deeper scavenge kidney ports over the HP+ series for even more scavenge flow volume. Hydraulic lifters have a full.

200 of total travel designed with a slower bleed down rate to handle heavy valve spring pressures, increase engine RPM before valve float and feature increased roller clearance for steep ramped camshafts and clearance for the Milwaukee Eight front exhaust camshaft lobe flange. OIL LEVEL NOTE - DO NOT OVERFILL OIL TANK It is important to get the correct hot oil level in your bike. Feuling recommends running the oil level 90%-99% full when hot. Letting the bike idle or warm up on the kickstand will naturally fill the engine case and skew the oil level in the tank. The following steps are recommended to achieve proper oil level: 1. Ride the bike until operating temperature is reached. Shut the bike off while still in the upright position. (This insures an accurate reading) 4. Once the bike is on the kickstand check oil level. Add or remove oil as needed. Does not recommend tuning beyond stock emissions standards.

Before you unwrap your parts double check your fitment and once unwrapped, look the item over before trying to install it. If you can snap a picture of the damage and notify us ASAP we can replace the order right away.

Notify us right away so we start the process. We're happy to step in and get the ball rolling.

An estimated restock date will be provided at the time of cancellation. The item "Feuling 7268 Race Series Cam Chest Kit with 592 Cam Water Cooled 17-19 Harley M8" is in sale since Wednesday, June 5, 2019. This item is in the category "eBay Motors\Parts & Accessories\Motorcycle Parts\Engines & Engine Parts\Camshafts". The seller is "easternpc" and is located in Gambrills, Maryland. This item can be shipped worldwide.
Feuling 7268 Race Series Cam Chest Kit with 592 Cam Water Cooled 17-19 Harley M8