Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit

Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit
Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit
Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit
Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit

Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit
New Tormek T4 Water cooled sharpening system machine with NVR switch The Tormek T-4 incorporates new, innovative, patent pending features. Firstly, the zinc cast top incorporates the key components of the main shaft, Universal Support and motor assembly resulting in superb accuracy as standard. Secondly, the Universal Support is held in two sleeves in the zinc cast top, meaning that the improved locking design and tighter tolerances will give even better results.

Both designs give improved accuracy and precision for easy sharpening on the new Tormek T-4. The T-4 model is the latest incarnation in a long line of Tormek water-cooled grinding systems. In common with its larger sibling, the T-7, it is ideal for sharpening cabinetmaking hand tools, knives, scissors and woodcarving and turning tools.

It comes supplied with two useful accessories, the first of which is the SP-650 Stone Grader that can be used to keep the stone cutting efficiently as well as changing the surface from a (220g) coarse cut to (1,000g) fine. The equivalent of 6,000g can be achieved on the leather wheel. The second is the AngleMaster, an adjustable device used to set the correct angle for grinding plane and chisel blades. Magnets on the reverse side of the AngleMaster mean that it is easy to store it conveniently on the steel machine plate.

Also supplied is the unique Tormek Handbook, where all the information that is required to shape, sharpen and hone your tools to perfection can be found. The T-4 uses a powerful, industrial AC motor and the shaft supporting the wheels is made from corrosion resistant stainless steel. The 200mm(8) diameter stone has the Tormek EzyLock mounting system for fast stone changes without a spanner. Tormek HTK-806 Hand Tool Kit For Tormek T3 T4 T7 T8.

Maintain an edge on a wide range of tools. Packed in a high-quality storage case with foam insert. SVM-45 for general and short knives. SVM-140 for long chef's and filleting knives. SVX-150 for scissors and shears. SVS-38 for carving and butt chisels. SVA-170 for axes and hatchets.

SVM-00 for carving knives and pocket knives. Packed in a high-quality storage case with an opaque lid and foam insert, the HTK-806 is a comprehensive kit of 6 jigs for sharpening.

The jigs enable you to sharpen a wide range of tools such as axes, scissors, long chef's knives, short bladed knives. Carving and butt chisels, pocket knives and garden shears. The jigs ensure you are able to reproduce and repeat the correct edge or bevel.

Angle time after time on each and every tool. The Tormek HTK-806 contains the following Tormek jigs: SVM-45 Short Knife Jig, SVM-140 Long Thin Knife Jig, SVX-150 Scissor Jig, SVS. 38 Short Tool Jig, SVA-170 Axe Grinding Kit and SVM-00 Small Knife Holder. The set is compatible with Tormek T-7, T-3, T-4 and T-8 machines.

This item is in the category "Home, Furniture & DIY\DIY Tools & Workshop Equipment\Power Tools\Grinders". The seller is "rdg355" and is located in this country: GB.

This item can be shipped worldwide.
Tormek T4 T-4 Water Cooled Sharpening System With Htk-806 Handtool Kit